Further exploration of napkins printed with paper-laminated screens

I've also been working on the printed napkin project, started in the workshop I took with Claire Benn in October.  In the last week, I've made two more screens (bottom left and bottom right in the above photo), and I tried out six colors for the base fabric.  On all six, I used a dark value of Dharma's MX Indigo-colored dye when pulling the prints.  My thoughts on each of the above, with numbering starting with the upper left.

1.  Lavender:  This screen was made by stamping with 2"acrylic squares.  I'm happy with the color.  I also like the design, though I've just made another screen with the same size squares, hoping that I get a better application of the matte medium that I stamp with.  I'd like to have more lavender showing after the print.
2. Chartreuse: For this one, I cut out bowl-shaped stamps from sheets of foam, and stamped the screen.  I'm happy with both the color and the design.
3. Teal:  For this one, I drew on the screen columns of interlaced squares, a pattern I have used in quilting.  See the photo below for an example where I used very fine black thread for the design.  But when I "drew" with a squeeze bottle filled with liquid matte medium, the result was very different.  Once I got over disappointment about how messy it was, I have to admit that I like the randomness of it.  



Interlaced squares, quilted with Invisafil thread.




4. Rust: The color is OK, but the design (another adaptation of a quilting design) is awful!
5. Light blue: This design was made by stamping with 3" acrylic squares.  Opposite problem from #1--too much medium transferred to the screen, so not enough dark Indigo got through the screen.
6. Coral: This was an attempt to use one of my line drawings of clover, also done successfully as a quilting design.  Again, the matte medium applies much more loosely, and this ends up looking like a bunch of spiders instead of flowers.  I do like the color, though.

Here are the drawn and stitched versions of clover, so much nicer than what I did on the screen:

drawing of clover, 2012

stitching of clover, 2016

THE DESIGNS: I am aiming to get at least four screens that I'm satisfied with.  I could give up on drawing on the screen, but I'm not ready to yet.  I've drawn on another screen, using a much narrower opening in the needle-nose bottle that I'm drawing with. That one is another re-purposed quilting design, but plan to try a couple more that are more gestural, taking advantage of the looseness of the medium rather than fighting it.

THE COLORS:  I wanted to have six colors that worked together, but I think I may go with just four.  It is much more difficult than I anticipated to pick an array of colors that work with each other as well as with the dark indigo.  I am also thinking of another color array of neutral tans and/or grays that I would print with black.  In the two photos below, just think color; I won't continue re-use the "clover" screen on the coral cloth.

 

WHAT MAKES A SET?  I have been trying out colors and designs at the same time, but it may be that a set would be more pleasing if it was one color in four designs, or four colors in one design.  Here are two pieces from October, just blue and the cream color of the muslin cloth I'm using as the base fabric. These are unified by the blue/cream color scheme, and also by the commonality of a stamped image to make the screen.

So many choices. . .  Your thoughts most welcome!

Printing, stamping, and writing with thickened dye

I recently came back from a five-day class at the Barn with Carol Soderlund.  The class was called "Visions and Revisions," and was aimed at experienced dyers.  Students let Carol know ahead of time the particular areas of dyeing that we wanted to work on, and then we worked independently with Carol's guidance.  There were only five of us in the class, so we got a lot of attention, and Carol was enormously generous with her time and knowledge.  I took my first class in fabric dyeing with Carol in the spring of 2009.  With the skills gained in that class, I have been able to successfully dye fabric for a number of quilts, but I felt I needed further help to go in some other directions, particularly in the use of thickened dye as "paint" that one can use to print, stamp, paint, and write with. 

Knowing that I would like to create more fabric with the texture and/or color of stones, I worked with a limited palette of neutrals the whole week.  (For an example of my previous work about stones, done with paint rather than dye, click here.)  With a set limited palette, I could focus on learning techniques, and just use the array of five or six colors that I had mixed up.

I worked on over 30 pieces of fabric over the week, some about a yard long, others just small rectangles.  My favorite piece is the one at the top of the post, especially the top gray tier (click on any photo to bring up a larger image).  This is a silk screen print, using corn husks to mask the screen:  husks torn and arranged on top of white fabric, silk screen laid on top, and then gray dye pulled through--dye goes to the spaces between the shapes of the corn husks.  I printed the screen (about 12x18") several times across the width of the fabric, and then I turned it 90 degrees and printed over the first series.  In the tier printed with tan, I used leaves as well as corn husks; you can see some of those shapes maintained, even though I again did both vertical and horizontal printing.  Here's a detail of the gray tier:

OK, less detail on the rest!  Here are the pieces I did that I am most likely to follow up on in one way or another.  The next one is done with a stamp, stamped in a vertical position with gray dye and then horizontally with tan.

Here's the stamp I made for the piece--very easy to make, cutting shapes out of "Fun Foam" and sticking them on a piece of foam core as the base:

Another kind of printing is done with a thermofax screen, a technique that allows you to burn a line drawing into a screen.  Here I tried out screens made from the drawings I've been doing since the summer:

Here I took the screen for the enlarged detail of salvia (on the right above), and I printed it multiple times.  then I painted grey dye over one bunch to see what it would look like on colored fabric:

And here's one done from laying double-pointed knitting needles on a photocopy machine.  The screen was done with the needles all parallel to each other; the print was done by multiple pulls on the same screen.  This was printed on fabric previously dyed tan.

I like this next piece a lot.  I started with gray fabric, wet it and scrunched it up, and then dabbed gray and tan paint on it.

And a detail--cut up, this would work well as fabric for stones.

I also made some stamps in the shapes of stones.  First I used gray dye and a foam roller for applying the dye:

Then I used more colors, and I used a foam brush to apply the dye, which gave more texture to the stones.

Here's a piece with good potential for stone texture (rather than shape).  It was done using a paint roller, the kind with a very rough foam roller, meant for texturizing paint application.  I rolled over white fabric with grey paint.  I can put another layer or two on, to have less white.  Or if do another piece like this, I would probably start with an already-dyed piece of fabric and then roll over it with one layer.

I was also interested in writing with dye on fabric.  I wanted to obscure the actual text, so this version was done by monoprinting:  I wrote on a plastic-covered table with the dye, then laid the fabric on top of it--so the writing comes out backwards.

Here are a couple of images from fabric I printed using a "deconstructed screen"--a different (and more complicated) process than regular printing with the silk screen, and not one I'm likely to do again, but I can cut some good "stones" out of these pieces.  The base of this screen was twine laid down on the screen in somewhat snaky parallel lines.

Finally, here's a photo of the wall where some of my work was hung up.  A very productive week, with a lot to process in its wake. . .  I am happy with the range of techniques I learned; now I need to look over the work I produced and decide which techniques I'd like to pursue further.  I did not intend to create "finished" fabric at the workshop, so I'm glad to have even just a couple that I'm happy with as is.

Screen-printing and batik workshops

I'm back home from a couple of days of mixed media workshops in Chicago. I did two workshops; the first was on Thermofax screen printing taught by Pokey Bolton, and the second was on soy wax batik with Melanie Testa. For the screen printing workshop, we were able to send an image in advance, so at the workshop we each had a personal screen to work with, as well as other screens that Pokey brought with her. I sent in an ink drawing:

In my favorite piece, I printed it in two different directions, overlapping.

Do double-click on these images for a much better view. The photo at the top of the entry is a detail of this wider piece. I like it. I may just mount it as is and put it on the wall. I like the process of printing quite a bit. One quilt I have in mind includes some repeated words/phrases. Printing might be a good way to get them onto fabric.

And here are a few of the many small pieces I did in the batik workshop. The first was one of several I did to see if I could get fabric usable for my quilts dealing with stones; the wax was applied with a paint brush. Yes, the resulting fabric works, though straightforward painting might do just as well, with less trouble.


The next one was done by first using paint to stamp black triangles onto the white fabric. Then I put wax down in larger triangles and painted all with black. (Thanks to Melanie, who gave me a mini-lesson on varying scale in pattern design as I was trying to figure out what to do after the small stamped triangles.)

This next one was an experiment to see what I could do with a pattern like the one I used in the screen-printed piece, created here with a tjanting tool that allows one to "draw" in wax. The blobby squiggle came from turning the tool upside down by mistake.
And a last one--this one was to try out red and black together, playing around with a potato masher (the parallel lines) and a ravioli cutter (the squares). Another quilt I have in mind involves red and black, and it could be that batik (or printing) would be one way to get to the image I want.

So, I had fun learning a couple of new techniques, with the guidance of two excellent teachers, and there's a chance one or both of these will be of use in future quilts. Before the summer comes to an official end, there's one more technique I want to try out--painting with thickened dyes (rather than the acrylic paint I've used before). More complicated, but different results.